Tesla style model Ford Explorer 2011- (12.1 inch) installation guide

2.Remove the fixing screws of the original car panel

3.Remove the original car panel, and plug out the air conditioning control cable behind the panel

4.remove the original car air conditioning control panel

1)take out back cover screws

2)Unplug the left and right sides of the cover, and remove the back cover

3)unplug the the three cable marked in green , and remove the fixed air-conditioning plate screws

4)Remove the screws fixing the panel decorative frame

5)Unplug the air conditioning control knob and remove the plating ring

6)Then remove the knob retaining ring

7.Then remove the air conditioning control board

8.Put the air conditioning control board to the metal cover, and then use the original AC panel plastic cover, and lock the screw fixed

9.Remove the original car main unit

10.unplug the original cable(attached the original cable pics)

11.plug the cable from the accessory into original car cable

12.Remove the original car USB / AUX box, replace the USB board with our USB board in the accessories ,then plug in the USB adapter cable, And then plug in the power cable, video cable, dual USB, radio antenna , GPS antenna

13.use the installation bracket fix the main unit to the original dashboard

14.put the double flashing lights to the original car storage box

15.put the car air conditioning control panel have been modified into the original car storage box ,and then connect the double flash control cable to the air conditioning socket (see the attached pic)

16.check the connect no problem,then power on the model to test the radio, GPS navigation,Dual flash, USB, atmosphere lights, rear view and other functions as normal,use the screws to fix the model,then install back the decoration strip