lut 14, 2025

Install a JeeP Grand Cherokee 2014-2019 Vertical Screen Like a Pro!

So, you've decided to take on the challenge of installing a JeeP Grand Cherokee 2014-2019 Vertical Screen. Congratulations! You're about to embark on an adventure that will not only enhance your driving experience but also showcase your skills as a true DIY enthusiast.

Before you begin, make sure you have all the necessary tools at your disposal. This includes a screwdriver, trim removal tools, and a healthy dose of determination.

How can you conquer this challenge like a pro?

First, let's take a look at the original car interior and original operating position

Original car interior: 2016 3.0L Elite Nav Plus

Original CD

Original steering wheel control:

Right rear of the steering wheel is volume up/down/mode switching

Behind the left side of the steering wheel is the up/down song/confirmation button

Rear USB(The rear USB socket is a charging socket and is not intended for reading.)

Let's get started with the official installation

1.Release the centre panel and remove it.

2.Remove the center panel AC control panel wiring harness plugs

3. Remove the 4 fixing screws on the left and right sides of the display.

4. Remove all wiring harness plugs from the rear of the display.

Original wiring harness definition:

Wiring AC control wire plug processing:

The AC control harness plug needs to be processed on-site during the installation of the machine, and the cut portion needs to correspond to the original AC control wire plug

Take out the left and right air-conditioning vents on the original panel and install them into the corresponding holes of the air-conditioning vents of the vertical screen unit.

After installing the original car's air outlet, mount the machine to the original car's central control installation position. This completes the installation process.